Tech Support: info@avproglobal.com
MSTest Pro get's a new Update!
- Published , by Tom Devine
General changes
-More WiFi functionality coming. Soon you will be able to connect the MSTest Pro to the local network and be able to log in to share reports, etc
-Current FW with release notes will soon be on Murideo.com
-User can email reports directly to MSOL for analysis. To email reports to MSOL the unit MUST be hardwired to the network. WiFi capability coming
-To email reports to MSOL the user must include their email address (best done on PC, smartphone, or tablet) so MSOL knows who reports are coming from
-User logo remains the same. 200x200 (must be square) and .png file
-Reports will automatically upload to the cloud if could sync is on in the settings menu
-If cloud sync is off in the settings menu you can still upload reports to the cloud by clicking “sync to cloud”
-You can now hot swap modules EXCEPT 2310 Tx or Rx. Continue to power unit down before when swapping those in or out
-New demo videos coming
-can be downloaded to memory stick for later viewing, or can be viewed on screen. Unit has no speaker so you must connect headphones or audio system via 3.5mm connection
-Remote monitoring is now available. Contact MSOL to open account to access portal. Currently this is a free service
General GUI changes
-New Link icon at the top of the screen is colored based on link quality
-Link quality test has higher tolerances than before. Orange means there is not much headroom so treat it as a caution warning
-Green still means PASS
-Red still means FAIL
-New icon at the top of the screen indicating if LAN is connected or not
-Red “moving line” at the top of the screen indicates that the unit is “thinking”
Log Analyzer
-Log Analyzer can now be scheduled for a specific start/stop time. Max is still 24 hours
-HDBaseT 2.0 – Log Analyzer not available to this time
-While using Log Analyzer you cannot do anything else with the unit
-When uploading csv files from Log Analyzer you can email them straight from the unit or you can email to support@msol.com. Analysis of csv files by MSOL is currently free
HDMI Generator
-HDMI Generator patterns now stay up until user changes it (old GUI had a timer for how long patterns would stay up)
-HDMI Generator - has a new button for scaling. Using this, parameters stay the same. Only difference is patterns will now fill the screen entirely. If this is off, patterns will show natively
AvioP/Network Analyzer
-AVOIP/Network Analyzer – can buy and activate from unit
-MXNEXT switch coming
-IP Analyzer is included in all Murideo units. License can be obtained from Murideo or MSOL. License can be activated by contacting MSOL
