BLX-1K

Description

Balanced Line Transceiver


Professional A/V installers often encounter projects requiring long cable runs, and the BLX-1K has been engineered as a premium, simple solution to efficiently address these challenges. The BLX-1K is a signal extender that sends and receives a fully balanced, noise-rejecting, analog audio signal up to 1000 feet over standard CAT5e/6A cable.

Designed for use in pairs at both ends of the signal path, each BLX-1K contains a 2-channel receive stage as well as a 2-channel transmit stage, enabling audio to travel in both directions across a span of standard CAT5e/6A. Once wired connections are made, the A/B button on one unit is pressed to reverse the signal path. Signal gain can then be set to complete the installation. The BLX-1K comes equipped with a 24 VAC transformer for easy connection and ultra-quiet performance.

The BLX-1K delivers a stout output of nearly 8 Volts rms with an exceptionally low noise floor, providing a pure, crystal clear audio signal over long Ethernet runs—the ultimate problem-solver for A/V installers.

BLX-1K

Product form

Balanced Line Transceiver

  • Send/receive high-quality audio up to 1000 feet
  • High gain, low noise outputs
  • Supports standard Cat5/6 cable
  • Independent gain and attenuation controls

SKU: ACP-BLX-1K

  • Shipped today? Order within: Nov 19, 2026 13:00:00 -0600

Description

Balanced Line Transceiver


Professional A/V installers often encounter projects requiring long cable runs, and the BLX-1K has been engineered as a premium, simple solution to efficiently address these challenges. The BLX-1K is a signal extender that sends and receives a fully balanced, noise-rejecting, analog audio signal up to 1000 feet over standard CAT5e/6A cable.

Designed for use in pairs at both ends of the signal path, each BLX-1K contains a 2-channel receive stage as well as a 2-channel transmit stage, enabling audio to travel in both directions across a span of standard CAT5e/6A. Once wired connections are made, the A/B button on one unit is pressed to reverse the signal path. Signal gain can then be set to complete the installation. The BLX-1K comes equipped with a 24 VAC transformer for easy connection and ultra-quiet performance.

The BLX-1K delivers a stout output of nearly 8 Volts rms with an exceptionally low noise floor, providing a pure, crystal clear audio signal over long Ethernet runs—the ultimate problem-solver for A/V installers.

  • FEATURES
  • SPECIFICATIONS
  • RESOURCES
  • Send/receive high-quality audio up to 1000 feet
  • High gain, low noise outputs
  • Simple connection with one-button setup
  • Supports standard CAT5e/6A cable
  • Separate balanced line driver and receiver stages
  • Independent gain and attenuation controls
  • Ground lift option (when using shielded CAT5e/6A)
  • Integrated mounting brackets
General
Unbalanced Inputs (RCA)2
Unbalanced Input Impedance100 kΩ
Maximum Unbalanced Input Signal Level3.8 Vrms
Balanced Inputs (CAT 5e/6A)1 (2 channel)
Balanced Input Impedance200 kΩ
Power Supply24 VAC
Current Draw50 mA
In the BoxBLX-1K, AC Adapter, Manual, Warranty
Outputs
Unbalanced Outputs (RCA)2
Unbalanced Output Impedance150 Ω
Maximum Unbalanced Output Signal Level7.5 Vrms max
Balanced Outputs (CAT 5e/6A)1 (2 channel)
Balanced Output Impedance150 Ω
Maximum Balanced Output Signal Level15 Vrms max
Physical
Dimensions (Unit)W Ă— D Ă— D: 6.2 Ă— 4.3 Ă— 1.0 in.
Weight (Unit)1.0 lb. (0.5 kg)
Performance
Frequency Response20 Hz to 20 kHz, ± 1 dB
Signal-to-Noise Ratio>100 dB (ref. full output = 7.5 Vrms)
THD+N0.1%
Headroom8.5 dB
Channel Separation90 dB (1 kHz)
CMRR>69.5 dB (1 kHz)

MANUAL
DATA SHEET

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
​For more information, go to www.P65Warnings.ca.gov.

Recently viewed products

Login

Log in with Legacy Account →