XP to ICP Comparator
ICP · XP · KX Control Processors

XP to ICP Comparator

Start from the legacy unit in the rack — XP-3, XP-6s, XP-8v or KX4 — and read what changes when it is replaced by an ICP.

7 models
33 specifications
AVPro Global · RTI
Set the reference, then choose the ICP models to compare Every delta is read against the legacy reference.
Reference — legacy unit one of four
Compare to one to three ICP
Direct replacements
Specification comparison for the selected control processors
AVPro Global  |  avproglobal.com  |  877-886-5112
“Expansion only” (ID12): an ICP must be the primary control processor in a system in order to use ID12. An XP or KX4 can take part in an ID12 system, but only as an expansion device behind an ICP primary — on its own it cannot provide ID12.
Processor ranking: i.MX8MM (quad-core 64-bit Cortex-A53) outranks i.MX53 (single-core Cortex-A8), which outranks i.MX35 (single-core ARM11). Hover a processor name for its core detail. Core count, clock and memory are listed separately as their own rows.
Data from ICP vs. XP Processors Comparison Chart — 33 specifications across 7 models, including the ID11 / ID12 compatibility rows. Blank cells in the source are shown as “—”. Green badges mark where an ICP gains on the legacy reference — counts, capability, link speed, cores, memory and clock. Specs that are equal, lower, or not directly rankable carry no badge, so compare the values themselves when the reference is a larger chassis than the ICP beside it. The All 7 units view treats every model as an equal — no reference, no badges, values only — since with four legacy units on screen a single delta would be ambiguous.

Login

Log in with Legacy Account →

New to AVPro Connect? Instructions →