ConferX Low-Profile USB-C Wall Plate Transmitter via HDBaseT
- VendorAVPro Edge
ConferX Low-Profile USB-C Wall Plate Transmitter via HDBaseT
- VendorAVPro Edge
Auto-sensing Input – When users connect a USB Type-C cable from their device, the AC-CXWP-LPU-T detects signal presence, activating transmission. LED status indicators confirm signal presence and link connection to receiver.
HDCP Input Request Switch – Installed where copy-protected data will never be transmitted, an HDCP input request dip switch can be toggled from ON: HDCP 2.x Requested, to OFF: No HDCP Requested, ensuring failure-free connections.
HDBaseT 2.0 Protocol Signal Transport – Properly run and correctly terminated CAT 6A UTP cable provides transmission distances as great as 328 ft (100 m) for HD 1080p signals, and 229 ft (70 m) for 4K/ 60 Hz,4:2:2, 8-bit UHD signals. 18 Gbps total bandwidth signal transmission is available using AVPro Edge Invisible Compression Technology.
PoC HDBaseT Powered – Power supplied via HDBaseT receiver devices. No local power required.
EDID Management – A 16-position rotary dial enables EDID selection, including copy-from-output capability.
| General | |
| Notes | Transmitter |
| Video | |
| Video Resolution | Up to 4K/60 Hz 4:2:0 Up to 4K/60 Hz 4:4:4 |
| VESA Resolutions | Up to DCI 4K (4096x2160) |
| HDR Formats | Dolby Vision, HDR10, HDR10+, HLG |
| Color Space | YUV (Component), RGB (CSC: ITU-R BT.601, ITU-R BT.709, ITU-R BT.2020, DCI-P3 D65) |
| Chroma Subsampling | 4:2:0 4:4:4, 4:2:2, 4:2:0 |
| Color Bit Depth | Up to 16-bit (1080p), up to 12-bit (4K) |
| Audio | |
| Audio Formats Supported | PCM 2.0-Ch., LPCM 5.1 & 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, DTS:X, Dolby Atmos |
| Audio Formats Supported HDMI | PCM 2.0-Ch., LPCM 5.1 & 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, DTS:X, Dolby Atmos |
| Usb | |
| Version | USB 2.0, up to 290 Mbps |
| Ports | USB Type-C (HOST) (2x) USB Type-A Device, female |
| Distance | |
| HDBaseT Distance (4K) | 100 m (328 ft.) (CAT 6A) |
| HDBaseT Distance (1080p) | 100 m (328 ft.) (CAT 6A) |
| HDMI Cable Distance (Passive) | Up to 50 ft. (using Bullet Train HDMI) |
| HDMI Cable Distance (AOC) | Up to 130 ft. (using Bullet Train AOC) |
| Other | |
| HDCP / Copy Protection | HDCP 2.3 and earlier |
| Bandwidth | 18 Gbps (w/ ICT) |
| CEC | Yes |
| Control | |
| Rear Panel | RS-232, HDCP Dip Switch, EDID Dial |
| Ports | |
| HDBaseT | Output to Receiver: RJ45 Input from Transmitter: RJ45 |
| USB | USB Type-C (HOST) (2x) USB Type-A Device, female |
| Consumed USB Tiers | 1 Tier - This device adds one tier to the USB chain due to its embedded USB hub. |
| RS-232 | 3-pin Terminal Block |
| HDMI | Output: HDMI Type-A 19-pin, female |
| Environmental | |
| Operating Temperature | 23 to 125 °F (-5 to 51 °C) |
| Storage Temperature | -4 to 140 °F (-20 to 60 °C) |
| Operating Humidity | 5% to 90% RH, non-condensing |
| Power | |
| Power Consumption | Total: 12 W max |
| Power Supply | Receiver: Input: 100 VAC to 240 VAC ~ 50/60 Hz Output: 48 VDC, 0.5 A |
| Physical | |
| Dimensions (Unit) | Without faceplate: L × W × H: 31.75 × 49.28 × 106 mm (1.25 × 1.94 × 4.17 in.) Without faceplate EU: L × W × H: 31.75 × 79 × 79 mm (1.25 × 3.11 × 3.11 in.) L × W × H: 35.052 × 82.55 × 82.55 mm (1.38 × 3.25 × 3.25 in.) |
| Wall space | Single-gang |
| Compatible Box Types | Mud Rings, EU Boxes, Stud Mount, Clamp Mount, Metal & Plastic Boxes, LV Boxes |
| Dimensions (Packaged) | L × W × H: 159 × 137 × 89 mm (6.25 × 5.375 × 3.5 in.) |
| Weight (Unit) | 0.54 lb. (0.25 kg) EU: 0.46 lb. (0.208 kg) 0.69 lb. (0.31 kg) |
| Weight (Packaged) | 0.72 lb. (0.37 kg) EU: 0.61 lb. (0.278 kg) 0.79 lb. (0.36 kg) |
| Notes | *Specifications subject to change without notice. Mass & dimensions are approximate; RECEIVER *Specifications subject to change without notice. Mass & dimensions are approximate |
The AC-CXWP-LP Low-Profile series of wall plates are compatible with several receiving devices in the AVPro Edge line up. Depending on the model of the wall plate being used, certain extenders and conferencing switchers should be used to take advantage of all available features.