18Gbps 2x10 HDBaseT Distribution Amplifier
- VendorAVPro Edge
18Gbps 2x10 HDBaseT Distribution Amplifier
- VendorAVPro Edge
18Gbps 4K HDBaseT Distribution (4K60 4:4:4) - Full 4K resolution is becoming increasingly important in mass distribution applications. In many of these applications images are being viewed at very close proximity and having 4K is key to delivering a sharp message. Additionally, this feature is valuable in public spaces where digital documentation is being shown, making messages and memos readable. Don’t settle for limited 4K, deliver high bandwidth 18Gbps 4K60 (4:4:4) images to every connected display.
Cascading - The AC-DA210-HDBT was built to be cascaded into additional units, allowing you to distribute your content to 100’s of displays. The AC-DA210-HDBT also has two HDMI outputs so that you can daisy chain both sources and switch them across massive cascaded systems.
Audio De-embedding - A truly unique feature to the AC-DA210-HDBT. Often times you need to extract compatible audio from the sources that is prepped for a secondary audio amplifier. With this unit you have options. You can choose to extract your audio from the unit by 2CH Phoenix, SPDIF, and Toslink Optical increasing the possibilities and compatibility. The deembedded audio is always active so you just need to plug and go. Audio always follows the active source.
"Max Flow" Chassis - The 19 inch 1U Rack Mount Chassis is designed for maximum air flow, this is ideal for stacking in tight racks. You can walk off the job knowing that your core distribution will remain calm and cool under pressure for years to come.
Ultra Low-Profile Receivers w/ PoH - The AC-DA210-HDBT is compatible with the AC-EX70-444-RNE Ultra Slim HDBaseT receivers. On top of saving a ton a space and being able to put it anywhere, it is fully powered by PoH (Power Over HDBaseT) eliminating the need for bulky power supplies on the display end. IR and RS-232 signals can also pass through to the receivers for remote control.
| Video | |
| Video Resolution | Up to 4K 60 Hz 4:4:4 |
| VESA Resolutions | Up to DCI 4K (4096X2160) |
| HDR Formats | Resolutions: 420, 422, 444 (10 and 12 deep color) HDR10, HDR10+, Dolby Vision, HLG |
| Color Space | YUV (Component), RGB (CSC: Rec. 601, Rec. 709, BT2020, DCI, P3 D6500) |
| Chroma Subsampling | 4:4:4, 4:2:2, 4:2:0 |
| Color Bit Depth | Up to 16-bit (1080p), up to 12-bit (4K) |
| Audio | |
| Audio Formats Supported HDMI | PCM 2.0-Ch., LPCM 5.1 & 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, DTS:X, Dolby Atmos |
| Extracted Audio | 2-Ch. (3 Pin Terminal Block, Unbalanced) Digital (TOSLINK and S/PDIF) |
| Distance | |
| HDBaseT Distance (4K) | 70 m (230 ft.) (CAT 6A) |
| HDBaseT Distance (1080p) | 100 m (330 ft.) (CAT 6A) |
| HDMI Cable Distance (Passive) | 4K60 4:4:4: Up to 50 ft. (using Bullet Train HDMI) |
| HDMI Cable Distance (AOC) | 4K60 4:4:4: Up to 130 ft. (using Bullet Train AOC) |
| Other | |
| Compatible Receivers | AC-EX70-444-RNE, AC-EX70-UHD-R |
| Bandwidth | 18 Gbps |
| HDCP / Copy Protection | HDCP 2.2 and earlier |
| Control | |
| Ports | LAN, RS-232, IR, Micro USB |
| Web Interface | Yes |
| Ports | |
| HDMI | TX & RX: Type-A |
| HDBaseT | RJ45 W/ POH for HDBaseT Receivers |
| IR | TX & RX: 3.5 mm Stereo |
| RS-232 | 3 Pin Terminal Block |
| Power | 2 Pin Terminal Block |
| Environmental | |
| Operating Temperature | 23 to 125 °F (-5 to 51 °C) |
| Storage Temperature | -4 to 140 °F (-20 to 60 °C) |
| Operating Humidity | 5% to 90% RH, non-condensing |
| Power | |
| Power Consumption | Total: 60 W max |
| Power Supply | Input: AC 100 V to 240 V ~ 50/60 Hz Output: DC 48 V 2.5 A |
| Physical | |
| Dimensions (Unit) | L × W × H: 43.69 × 143 × 441.45 mm (1.72 × 5.63 × 17.38 in.) |
| Dimensions (Packaged) | Length/Width/Height Kit: mm: 88.9 x 336.55 x 495.3 inch: 3.5 x 13.25 c 19.5 |
| Weight (Unit) | 4.8 lb. (2.18 kg) |
| Weight (Packaged) | 7.4 lb. (3.36 kg) |
| Notes | *Specifications subject to change without notice. Mass & dimensions are approximate |
