TAA - MXnet 1G Evolution II Decoder with Dante

TAA Compliant

Description

The AC-MXNET-1G-DANTE-DV2-TAA is the TAA-compliant version of the AC-MXNET-1G-DANTE-DV2 Decoder. It maintains all the features and capabilities of the original AC-MXNET-1G-DANTE-DV2.

Click here for the non-TAA equivalent. 

AC-MXNET-1G-DANTE-DV2-TAA provides a stream break-out point to pass Dante signals to other Dante-enabled devices, such as Dante-capable DSP Matrix amplifiers or self-powered Dante-equipped speakers. The MXnet Evolution II platform provides system designers with flexible endpoint options while simultaneously consolidating wiring paths.

Installations that systematically deploy Dante audio but segregate it to an independent network can now simplify long-haul transport cabling into single destination endpoint routes. Encoded Dante streams are ferried from AC-MXNET-1G-DANTE-EV2-TAA encoders to any AC-MXNET-1G-DANTE-DV2-TAA decoder endpoint, using these as break-out bridges to leapfrog encoded signals closer to additional Dante devices. For example, Dante-enabled amplifiers can be strategically located physically closer to the speaker systems that they will power, potentially overcoming Audinate’s 100-meter Category cable distance threshold for Dante while also minimizing the lengths of wire connecting passive analog speakers. Dante-equipped self-amplified speakers may also take advantage of merged centralized stream routes. Imaginative creativity will quickly turn into material and labor savings.

The AC-MXNET-1G-DANTE-DV2-TAA retains the cool-running, energy-efficient, chip-top fan-free design characteristics of AVPro Edge’s MXNET-1G-EVO II series by incorporating Dante I/O software into the operating system chipset, which eliminates the thermal increase from the active device daughter board in previous implementations of Dante across the MXnet ecosystem. The AC-MXNET-1G-DANTE-DV2-TAA and its companion encoder, the AC-MXNET-1G-DANTE-EV2-TAA, each securely fit into the same accessory rack holder as standard MXnet EVO II encoders and decoders.

TAA - MXnet 1G Evolution II Decoder with Dante

Product form

The MXnet Evolution II platform provides system designers with flexible endpoint options while simultaneously consolidating wiring paths.

  • TAA Compliant – Made in the USA
  • Dante audio Pass-through/Break-out Bridge
  • High bitrate 3D Immersive Audio Compatible
  • Optimized Video Compression for Artifact-free Images
  • Support for HDR10, HDR10+ and Dolby Vision
  • USB and KVM Support

SKU: AC-MXNET-1G-DANTE-DV2-TAA

  • Shipped today? Order within: Nov 19, 2026 13:00:00 -0600

Description

The AC-MXNET-1G-DANTE-DV2-TAA is the TAA-compliant version of the AC-MXNET-1G-DANTE-DV2 Decoder. It maintains all the features and capabilities of the original AC-MXNET-1G-DANTE-DV2.

Click here for the non-TAA equivalent. 

AC-MXNET-1G-DANTE-DV2-TAA provides a stream break-out point to pass Dante signals to other Dante-enabled devices, such as Dante-capable DSP Matrix amplifiers or self-powered Dante-equipped speakers. The MXnet Evolution II platform provides system designers with flexible endpoint options while simultaneously consolidating wiring paths.

Installations that systematically deploy Dante audio but segregate it to an independent network can now simplify long-haul transport cabling into single destination endpoint routes. Encoded Dante streams are ferried from AC-MXNET-1G-DANTE-EV2-TAA encoders to any AC-MXNET-1G-DANTE-DV2-TAA decoder endpoint, using these as break-out bridges to leapfrog encoded signals closer to additional Dante devices. For example, Dante-enabled amplifiers can be strategically located physically closer to the speaker systems that they will power, potentially overcoming Audinate’s 100-meter Category cable distance threshold for Dante while also minimizing the lengths of wire connecting passive analog speakers. Dante-equipped self-amplified speakers may also take advantage of merged centralized stream routes. Imaginative creativity will quickly turn into material and labor savings.

The AC-MXNET-1G-DANTE-DV2-TAA retains the cool-running, energy-efficient, chip-top fan-free design characteristics of AVPro Edge’s MXNET-1G-EVO II series by incorporating Dante I/O software into the operating system chipset, which eliminates the thermal increase from the active device daughter board in previous implementations of Dante across the MXnet ecosystem. The AC-MXNET-1G-DANTE-DV2-TAA and its companion encoder, the AC-MXNET-1G-DANTE-EV2-TAA, each securely fit into the same accessory rack holder as standard MXnet EVO II encoders and decoders.

  • Key Benefits
  • Specs
  • Resources
  • In the Box

Proprietary Motion JPEG-based CODEC – MXnet Evolution II incorporates a proprietary video algorithm that carefully optimizes compression rates per multicast packet size. Genlock is supported, syncing a video source by frame rate to Decoders comprising a video wall for a simul-sync, tear-free appearance. 

 

Native 4K/60 fps Support – MXnet Evolution II enables 4K/60 fps 4:4:4 RGB / YCbCr, 10- and 12-bit natively or with dynamic metadata. When not lossless, the advanced encoding/decoding engine applies a limited, ultra-light compression, composing an artifact-free image upon decoding, including Dolby Vision and HDR10+ content. 

 

High Bitrate Multi-channel Audio Support – 3D immersive audio CODECs such as Dolby Atmos and DTS:X for IMAX Enhanced are now supported.

 

USB and KVM Support – Each Decoder unit has two USB ports. You may also connect a USB hub if needed to expand the number of USB ports. Connect and route any USB signals back to the Encoder Host. Use the MXnet Mentor software to specify the Host Encoder, and the upstream USB device connected the selected Decoder.

 

External Device Light Control - Light emission from an AC-MXNET-1G-DANTE-DV2 may be controlled via MXnet Mentor. Any status light, including network link LEDs and the OLED Data Window, may be optionally disabled to prevent unwanted distraction, enabling discreet placement where desired. Device lights may also be continuously “flashed” for high visibility when troubleshooting.

Encoding
Video CodecProprietary Codec based on M-JPEG, Dante™
Audio CodecProprietary Codec, Dante™ Audio
Latency16 ms@60 Hz
Streaming ProtocolsTCP, UDP, IP, IGMP-V2
HDCP / Copy ProtectionHDCP 2.2 and earlier
Video Input/Ingestion
Signal TypeDVI 1.0, HDMI 2.0b
Video Resolution720p@50/60 Hz; 1080p@24, 50 & 60 Hz; 4K@50/60 Hz 4:4:4*; 4K@30 Hz 4:4:4; 4K@60 Hz 4:2:0;4:2:2 4K@24 Hz 4:2:0/4:2:2 [Ultrawide Support]
Chroma Subsampling4:4:4, 4:2:2, 4:2:0, RGB
Color Bit Depth1080p 8-,10-,12-bit, 4K 8-,10-,12-bit
Visually Lossless4096x2160p@60 Hz (8-bit) 4:4:4 or RGB; 3840x2160p@60 Hz (12-bit) 4:2:2 Dolby Vision; 3840x2160p@60 Hz (10-bit) 4:2:2 HDR10/HLG; 1920x1080p@60 Hz (12-bit)
Audio
Audio Format (end to end)PCM 2, 5.1, 7.1 Channel, Dolby Digital 5.1 Channel, Dolby Digital Plus, DTS 5.1 Channel, DTS–ES, DTS–HD High Resolution, DTS-HD Master Audio, Dolby Atmos
Embedded AudioTOSLINK Audio In (Audio Return Channel Support only)
De-Embedded AudioBalanced Stereo Analog Audio (5-pin phoenix Only)
Ports
Ethernet / LAN(1) × female RJ45, PoE
SFP / SFP+(1) × SFP Slot
HDMI(1) x HDMI Type-A 19-pin female, HDMI Output
Audio(1) x 5-pin Terminal Block, Balanced L/R Audio out
IRTOSLINK Audio IN (Audio Return Channel Support Only): (3) × 3.5 mm mini-stereo jack, one IR-Pass, one IR-EYE, one IR-out
RS-232TOSLINK Audio IN (Audio Return Channel Support Only): (1) × 3 Pin Terminal Block
USBTOSLINK Audio IN (Audio Return Channel Support Only): (2) × USB 2.0 Type-A for USB extension & KVM; (1) × USB Type-C for MXnet service
Distance
Ethernet / LAN100 m (330 ft.) over CAT 5e and above
SFP / SFP+ and Fiber1000BASE-SX SFP Transceiver Module; (MMF, 850 nm, 550 m, LC, DOM); 1000BASE-LX/LH SFP 1310 nm 10 km Transceiver Module
Environmental
Operating Temperature23 to 125 °F (-5 to 51 °C)
Storage Temperature-4 to 140 °F (-20 to 60 °C)
Operating Humidity5% to 90% RH, non-condensing
CoolingFanless Cooling
Acoustic Noise Level0 dB
Power
Power ConsumptionMax: 9.7 W
PoEIEEE 802.3af (15.4 W)
Power SupplyInput: AC 120 V to 240 V-50/60 Hz 0.8 A Output: DC 12 V 2 A
Physical
MountingRack and furniture mount support
Dimensions (Unit)W × D × H: 199.14 × 119.86 × 19.84 mm (7.84 × 4.72 × 0.78 in.)
Dimensions (Packaged)W × D × H: 309.88 × 180.09 × 54.10 mm (12.2 × 7.09 × 2.13 in.)
Weight (Unit)1.41 lb. (0.64 kg)
Weight (Packaged)1.87 lb. (0.85 kg)
Regulatory / CertificationsFCC, CE, UL
Warranty10 years
Notes*Specifications subject to change without notice. Mass & dimensions are approximate

 

  • AC-MXNET-1G-DANTE-DV2-TAA (Decoder/Receiver Device)
  • 1 x IR Emitter
  • 1 x IR Receiver
  • 2 x Mounting Brackets
  • 4 x Screws for Mounting Brackets
  • 1 x 3-Pin Terminal Block

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
​For more information, go to www.P65Warnings.ca.gov.

Recently viewed products

Login

Log in with Legacy Account →