MXnet 10G 24 Port Copper PoE Network Switch
- VendorAVPro Edge
MXnet 10G 24 Port Copper PoE Network Switch
- VendorAVPro Edge
Processing Performance: A 680Gbps calculated switching capacity combined with a forwarding rate of 480Mpps signifies ample headroom for high data throughput and network efficiency.
Virtual Switch Framework: Synthesizes multiple AC-MXNET-10G-SW24C switches in the same layer into one logical device for high availability and scalability.
Carrier-Grade Build Rating: Carrier-Grade hardware and software design features high reliability and fail-safe redundancy capabilities for mission-critical applications, providing 99.999% uptime availability.
Fast Switching with Near-Zero Latency: Source-to-source switching to endpoints is virtually instantaneous if scaling is not required (100µs frame latency, or 1/150th of a frame). With scaling in use, the switching speed is between one to two frames, or about 17-34 milliseconds, considered visually imperceptible.
Preconfigured Comprehensive QoS: Quality of Service settings are optimized for Dante and SDVoE streams. Advanced load-balance configuration for SDVoE and MXnet applications optimize network performance by distributing high-volume data transfers and multicast streaming traffic across multiple paths to reduce congestion to optimize latency and other critical performance metrics.
Dante Audio Prioritized: AVPro is the first professional AV manufacturer to implement Dante-oriented QoS traffic prioritization to enhance network streaming performance in residential and commercial environments.
Class-Leading Performance: MXnet switches are the highest-performing switches in the AVoIP market segment.
| Ports | |
| Ethernet / LAN | (24) × 10G-mGig RJ45 Ports RJ45 Ports 1 through 8: POE++ Up to 60 W RJ45 Ports 9-24: POE+ Up to 30 W (2) QSFP+ 40G Ports (1) × 10/100/1000BASE-T Management Port (MGMT) |
| HDMI | N/A |
| Audio | N/A |
| IR | N/A |
| RS-232 | (1) × RJ45 console port (Out-of-Band) (9600 baudrate) |
| USB | (1) × USB 2.0 Type-A for MXNet Service and storage |
| Distance | |
| Ethernet / LAN | 100 m (330 ft.) over CAT 6A |
| SFP+ and Fiber | 10G SFP+ AOC cable up to 3 m, 10G SFP+ Multimode transceiver over Multimode fiber up to 550 m 10G SFP+ Single-mode transceiver over Single-mode fiber up to 20 Kilometers |
| Environmental | |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -40 to 70 °C |
| Operating Humidity | 5% to 95% RH, non-condensing |
| Performance | |
| Max SDVoE Endpoints | 24 (32 with QSFP+ 4x10G Hardware Profile Mode) |
| Switching Capacity | 680 Gbps |
| Forwarding Rate | 480Mpps |
| MAC Address Table | 32K |
| Routing Table | 16K |
| Jumbo Frame Support | 16K |
| L3 Interface | 1K |
| Power | |
| Power Consumption | Max: 530 W (1060 W if using dual power supply) (2nd PSU Not Included) |
| PoE | IEEE 802.3af (POE 15.4 W) IEEE 802.3at (POE+ 30 W) IEEE 802.3bt (POE++ 60 W) (Only ports 1-8) Total POE Power Budget: 1000 W |
| Thermal dissipation | 1812.176 BTU/hr |
| Power Supply | AC: 100 VAC to 240 VAC, 50 Hz to 60 Hz DC: Input 48 V to 57 V Up to two modular hot-swappable AC power supply units (only one PSU included with purchase) |
| Mounting | Rack-mount |
| Physical | |
| Dimensions (Unit) | W × D × H: 440 × 380 × 44 mm (17.32 × 14.96 × 1.73 in.) |
| Dimensions (Packaged) | W × D × H: 463.55 × 558.8 × 161.9 mm (18.25 × 22 × 6.375 in.) |
| Weight (Unit) | 12 lb. (5.44 kg) |
| Weight (Packaged) | 16 lb. (7.26 kg) |
| Regulatory / Certifications | FCC, CE |
| Warranty | 10 years; Specifications subject to change without notice. Mass & dimensions are approximate |

Network Switch