2km 18Gbps Fiber Optic Extender Kit
- VendorAVPro Edge
2km 18Gbps Fiber Optic Extender Kit
- VendorAVPro Edge
Extend content up to 4K/60 fps: Distance is no longer an obstacle to transmitting content, including signals featuring high dynamic range metadata. The AC-EXO-444-KIT spans the expanse of nearly any project demand. Readily available 10G SFP+ interface modules provide extension options if additional distance is required.
EDID Management: Dynamic EDID management, including EDID Copy, preserves system interoperability.
Control Signal Transport: Three-way bidirectional IR passthrough and RS-232 throughput provide control capabilities to/from devices tethered to the AC-EXO-444-KIT. I-PASS accepts direct control system commands via a mono 3.5 mm cable.
ARC/eARC Capable: Audio Return Channel enables HDMI ARC pass-through audio from the receiver to the transmitter. NOTE: No downmixing occurs; original signals up to Dolby Digital+ are passed through via TOSLINK. Dolby Atmos is passed over HDMI ARC.
Onboard Troubleshooting Aids: LED chassis indicators on the RX and TX provide visual status confirmation for power and HDMI signal presence. The RX unit generates HD and UHD test patterns via button press. The TX unit is capable of test pattern generation; however, this is available only via the API command line.
| Video | |
| Video Resolution | Up to 4K/60 Hz 4:4:4 |
| HDR Formats | HDR10, HDR10+, Dolby Vision, HLG |
| Color Space | YUV (Component), RGB (CSC: ITU-R BT.601, ITU-R BT.709, ITU-R BT.2020, DCI-P3 D65) |
| Chroma Subsampling | 4:4:4, 4:2:2, 4:2:0 |
| Color Bit Depth | Up to 16-bit (1080p), up to 12-bit (4K) |
| Audio | |
| Audio Formats Supported HDMI | LPCM up to 7.1-Ch. @ 192 kHz 24-bit, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos (All Formats), Dolby AC-4, DTS-Digital Surround, DTS-ES Discrete, DTS-HD High Res Audio, DTS-HD Master Audio, DTS:X |
| Audio Formats Supported Extracted (TOSLINK) | TX only: LPCM 2.0-Ch., Dolby Digital, DTS 5.1, Dolby Digital Plus |
| ARC/eARC | |
| Formats Supported HDMI ARC/eARC Out TX | LPCM 2.0-Ch., LPCM 5.1 & 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, DTS:X, Dolby Atmos |
| Formats Supported (TOSLINK) | TX out: LPCM 2.0-Ch., Dolby Digital, DTS 5.1, Dolby Digital Plus |
| Fiber | |
| Type | Single-mode OS2 |
| Connector Type | Simplex LC (Lucent Connector) |
| Recommended Fiber | OS2 Cleerline SSF™ Single-mode Fiber |
| Distance | |
| Single-Mode (OS2) | Up to 2 km |
| HDMI Cable Distance (Passive) | 4K/60 Hz 4:4:4: Up to 50 ft. (using Bullet Train HDMI) |
| HDMI Cable Distance (AOC) | 4K/60 Hz 4:4:4: Up to 130 ft. (using Bullet Train AOC) |
| Other | |
| Bandwidth | 18 Gbps |
| HDCP / Copy Protection | HDCP 2.3 and earlier |
| Ports | |
| HDMI | TX & RX: HDMI Type-A 19-pin, female |
| Audio (Extracted Digital) | TX Only: TOSLINK |
| IR Transmit | TX & RX: 3.5 mm Mono (2-Conductor) |
| IR Receive | TX & RX: 3.5 mm Stereo (3-Conductor) |
| RS-232 | TX & RX: 3-Pin Euroblock |
| Firmware / ISP Port | USB-C |
| Power | TX & RX: Barrel Connector |
| Environmental | |
| Operating Temperature | 23 to 125 °F (-5 to 51 °C) |
| Storage Temperature | -4 to 140 °F (-20 to 60 °C) |
| Operating Humidity | 5% to 90% RH, non-condensing |
| Power | |
| Power Consumption | Total: 4 W max |
| Power Supply | Input: 5 V DC, 2 A Output: 5 V 2 A Locking |
| Physical | |
| Mounting | Mounting brackets (screws included) |
| Dimensions (Unit) | L × W × H: 82.55 × 130.175 × 20.638 mm (3.25 × 5.125 × 0.8125 in.) |
| Dimensions (Packaged) | L × W × H: 136.53 × 192.1 × 84.14 mm (5.4 × 7.6 × 3.313 in.) |
| Weight (Unit) | 0.6 lb. (0.27 kg) |
| Weight (Packaged) | 3.8 lb. (1.7 kg) |
| Regulatory / Certifications | FCC, CE |
| Warranty | 10 years |
| Notes | *Specifications subject to change without notice. Mass & dimensions are approximate |
